Free flashcard deck
Organic Chemistry flashcards
20 cards, Medium, made and shared by a student on FORKSAI.
FORKSAI brings each card back with spaced repetition, right before you would forget it. Free to start, no card needed.
All 20 cards
Card 1
Explain how atomic size trends across a period and down a group are influenced by the principal quantum number (n) and effective nuclear charge (Z-effective).
Moving down a group, atomic size increases because the principal quantum number (n) increases, meaning electrons occupy higher energy shells further from the nucleus. Moving across a period from left to right, atomic size decreases because the effective nuclear charge (Z-effective) increases, pulling the outer electrons closer to the nucleus despite additional electrons being added to the same shell.
Card 2
Define atomic number (Z) and mass number (A), and explain their significance in characterizing an atom.
The atomic number (Z) represents the number of protons in an atom's nucleus, which uniquely identifies an element. It also equals the number of electrons in a neutral atom. The mass number (A) is the total count of protons and neutrons in the nucleus, providing an approximation of the atom's mass.
Card 3
Distinguish between an element and an isotope, providing an example to illustrate the difference.
An element is a pure substance defined by a specific, fixed number of protons in its nucleus (its atomic number, Z). An isotope refers to atoms of the same element (thus having the same number of protons) but possessing different numbers of neutrons, leading to different mass numbers. For example, Hydrogen-1 has one proton and no neutrons, while Deuterium (Hydrogen-2) has one proton and one neutron, making them isotopes of hydrogen.
Card 4
Compare and contrast ionic bonding and covalent bonding in terms of electron behavior and the types of elements typically involved.
Ionic bonding involves the complete transfer of electrons, typically occurring between a metal (which loses electrons to form a cation) and a nonmetal (which gains electrons to form an anion). Covalent bonding, in contrast, involves the sharing of electrons between two nonmetals. Ionic bonds form due to large differences in electron affinity/electronegativity, while covalent bonds form when elements have small differences in these tendencies.
Card 5
Define ionization energy and explain its relationship to the formation of cations.
Ionization energy is the energy required to remove one mole of electrons from one mole of gaseous atoms. Elements with low ionization energy readily lose electrons because less energy is needed to overcome the attractive force of the nucleus. This tendency to lose electrons makes them likely to form positively charged ions, known as cations.
Card 6
Explain the trend of electron affinity across a period and down a group, providing a reason for each trend.
Electron affinity generally increases across a period because atomic size decreases, allowing the nucleus to attract an added electron more strongly due to a higher effective nuclear charge. Down a group, electron affinity generally decreases because the increasing atomic size means the nucleus is further from the electron trying to be added, reducing the attractive force.
Card 7
Distinguish between a molecule and a formula unit, specifying the type of bonding associated with each.
A molecule is an aggregate of at least two atoms held together by covalent bonds, where electrons are shared. Examples include H2O or N2. A formula unit, conversely, is an aggregate of at least two oppositely charged ions held together by ionic bonds, where electrons have been transferred. An example is NaCl.
Card 8
Describe how cations and anions are formed and identify the types of elements that commonly form each.
Cations are formed when an atom loses one or more electrons, resulting in a net positive charge. Metals are the most common elements to form cations because they typically have low ionization energies, making it relatively easy to remove their valence electrons. Anions are formed when an atom gains one or more electrons, resulting in a net negative charge. Nonmetals are the most common elements to form anions as they tend to have higher electron affinities, allowing them to attract and accept electrons readily.
Card 9
Explain the Valence Shell Electron Pair Repulsion (VSEPR) principle and its primary objective in predicting molecular shapes.
The Valence Shell Electron Pair Repulsion (VSEPR) principle states that electron pairs (both bonding and lone pairs) around a central atom will arrange themselves as far apart as possible to minimize repulsion. The primary objective of the VSEPR model is to predict the three-dimensional geometry (shape) of molecules, which in turn helps lower the overall energy of the molecule.
Card 10
How does the difference in electronegativity (ΔEn) between two bonded atoms determine the type of chemical bond formed?
The difference in electronegativity (ΔEn) between two atoms in a bond indicates how strongly one atom attracts shared electrons compared to the other. A large ΔEn suggests a complete transfer of electrons, leading to an ionic bond. A small ΔEn indicates electron sharing, resulting in a covalent bond. If the sharing is unequal, due to a moderate ΔEn, a polar covalent bond forms, where electrons are pulled closer to the more electronegative atom.
Card 11
Define electronegativity and explain its inverse relationship with atomic size.
Electronegativity is a measure of an atom's ability to attract shared electrons to itself when it is in a chemical bond. It is inversely related to atomic size because smaller atoms have their valence electrons closer to the nucleus, experiencing a stronger effective nuclear charge. This stronger attraction allows smaller atoms to pull bonding electrons more effectively towards themselves, thus having higher electronegativity.
Card 12
Explain how to determine the polarity of a covalent bond using the provided electronegativity values (F=4.0, O=3.5, N=3.0, Cl=3.0, Br=2.8, I=2.5, S=2.5, C=2.5, P=2.1, H=2.1). Provide an example of a polar covalent bond.
The polarity of a covalent bond is determined by the difference in electronegativity (ΔEn) between the two bonded atoms. If ΔEn is significant (typically >0.4), the bond is polar, with electrons pulled towards the more electronegative atom. For example, in an H-Cl bond, Cl (3.0) is more electronegative than H (2.1), resulting in a ΔEn of 0.9. This makes the H-Cl bond polar, with a partial negative charge on Cl and a partial positive charge on H.
Card 13
Describe the general geometry and bond angles for AX2 and AX4 type molecules according to the VSEPR principle, assuming no lone pairs on the central atom.
For an AX2 molecule (two atoms bonded to a central atom with no lone pairs), the electron pairs arrange themselves 180 degrees apart to minimize repulsion, resulting in a linear geometry. For an AX4 molecule (four atoms bonded to a central atom with no lone pairs), the electron pairs arrange themselves in a tetrahedral geometry, with bond angles of approximately 109.5 degrees, to achieve maximum separation in three dimensions.
Card 14
Define a homonuclear molecule and a heteronuclear molecule, providing two examples for each from the notes.
A homonuclear molecule is composed of atoms of the same element bonded together, such as N2 or O2. A heteronuclear (or heteroatomic) molecule is composed of atoms of different elements sharing a bond, such as HF or H2O.
Card 15
Explain how both bond polarity and molecular shape contribute to determining the overall polarity of a molecule. Provide an example of a molecule with polar bonds that is nonpolar overall.
A molecule's overall polarity depends on both the presence of polar covalent bonds and the molecule's geometry. If a molecule contains at least one polar covalent bond, it has the potential to be polar. However, if the molecular shape is symmetrical, the individual bond dipoles can cancel each other out, resulting in a nonpolar molecule. For instance, CCl4 has four polar C-Cl bonds, but its tetrahedral geometry is perfectly symmetrical, causing the bond dipoles to cancel, making the overall molecule nonpolar.
Card 16
Define an ion-dipole force and provide a real-world example of where this intermolecular force is significant.
An ion-dipole force is an attractive force that occurs between an ion (a charged atom or molecule) and a polar molecule (a molecule with a permanent dipole moment). A significant real-world example is when an ionic compound like salt (NaCl) dissolves in water (H2O). The positive Na+ ions are attracted to the partially negative oxygen atoms of water, and the negative Cl- ions are attracted to the partially positive hydrogen atoms of water, facilitating dissolution.
Card 17
Describe the mechanism of a dipole-induced dipole force, using an example to illustrate its formation.
A dipole-induced dipole force occurs when a polar molecule (with a permanent dipole) approaches a nonpolar molecule. The electric field of the polar molecule distorts the electron cloud of the nonpolar molecule, temporarily inducing a dipole in it. This temporary dipole then experiences an attractive force with the permanent dipole of the polar molecule. For example, when HCl (polar) approaches Cl2 (nonpolar), the partially positive hydrogen end of HCl can induce a temporary dipole in the Cl2 molecule, leading to an attraction.
Card 18
Define a hydrogen bond, specifying the elements involved and its unique characteristics that make it a special type of dipole-dipole interaction.
A hydrogen bond is a particularly strong type of dipole-dipole intermolecular force that occurs when a hydrogen atom covalently bonded to a highly electronegative atom (specifically fluorine, oxygen, or nitrogen) is attracted to another highly electronegative atom (F, O, or N) in an adjacent molecule. Its unique strength arises from the very high electronegativity of F, O, or N, which creates a very strong partial positive charge on the hydrogen, allowing it to form a strong electrostatic attraction with the lone pair of electrons on an adjacent electronegative atom.
Card 19
Explain London dispersion forces (induced dipole-induced dipole) and how the concept of polarizability influences their strength.
London dispersion forces (LDFs), or induced dipole-induced dipole forces, are temporary attractive forces that arise between all atoms and molecules, including nonpolar ones. They occur due to instantaneous, temporary fluctuations in electron distribution, creating fleeting dipoles that can induce dipoles in neighboring molecules. Polarizability is the ease with which an electron cloud can be distorted to form these temporary dipoles. Larger atoms and molecules with more diffuse electron clouds are more polarizable, leading to stronger London dispersion forces.
Card 20
Define the principle of electrical neutrality as applied to writing empirical formulas for ionic compounds, providing an example.
The principle of electrical neutrality dictates that in an ionic compound, the total positive charge contributed by the cations must exactly balance the total negative charge contributed by the anions. This ensures the overall formula unit has no net charge. For example, when combining Mg2+ and Cl- ions, two Cl- ions are needed to balance one Mg2+ ion, resulting in the electrically neutral empirical formula MgCl2.
Study Organic Chemistry the way that sticks
Reading cards is not the same as remembering them. In FORKSAI you answer each card before you see the back, and the ones you miss come back first.
Study these cards freeMore flashcard decks
- Organic Chemistry flashcards (59 cards)
- Organic Chemistry 2 flashcards (21 cards)
- Organic 1 flashcards (70 cards)
- chemistry ionic , covalent flashcards (20 cards)
- Thermochemistry and Thermodynamics flashcards (149 cards)
- Género Bacillus y Clostridium flashcards (100 cards)